Material inquiry
A useful Teijin brief names the material family before it names a performance hope. Aramid fiber, aramid fabric, and carbon fiber reinforcement do not share one specification sheet. Say which of those routes you are on, then describe the protective contact, thermal exposure, or composite process that the material has to survive.
If you already hold a specimen, mention its date and what should stay unchanged. If you only hold a target, label that target as a requirement rather than as a measured result. Linear density, construction, mass per unit area, usable width, finish, and resin state are different fields. Leave unknown fields blank instead of estimating them.
A verified street address, telephone number, and direct mailbox are not published on this page. The form is the inquiry route. Use the checklist to decide what belongs in the message, and skip any line that does not apply to a fiber package, a fabric roll, or a prepreg.
Protective questions should name the hazard under review, such as cut, heat, flame, or abrasion, and the method you already have if a report exists. Reinforcement questions should say whether the reference is dry carbon fiber or a prepreg, and which layup or process the grade must fit. Do not attach an aramid result to a carbon fiber grade, and do not treat a fiber brand name as a certificate held by this website.
Write numbers with units when you have them: g/m² for mass per unit area, cm for usable width, percent by mass for fiber composition, and dtex or denier for linear density, with dtex = denier × 0.9. Staining colorfastness is often a 1–5 gray scale and lightfastness a 1–8 blue-wool scale. Those scales are method conventions, not measured values for a Teijin grade. Unknown company facts — street address, founding year, headcount, and certificate numbers — stay unknown on this page. Leave them blank rather than reconstructing them from the brand name. Worked example, not a customer record. Background: one note mixed an aramid cloth target with a carbon fiber tow question. Process: fiber composition, usable width, and GSM stayed with the cloth, and linear density stayed with the tow. Result: the two grades were not given one shared figure. Natural-fiber comfort and synthetic-fiber strength can both be the selection question, and neither is an environmental ranking. A stock question asks which batch exists; a custom question waits on a sample and a named test. Neither question confirms availability.